Panasonic PT-RQ13K
January 30, 2020
Panasonic PT-RS11K
January 30, 2020
Show all

Panasonic PT-RZ12K

89,971.00AZN

Categories: ,
Description
PRODUCT DETAILS

Compact 12 000 lumens Solid Shine laser business projector designed for long-lasting stable brightness in events and staging. Exchangeable lens – 24/7 Operation, Digital Link,  High Frame Rate 120 Hz, Geometric Adjustment, Portrait Mode, Digital Link, 20 000:1.

KEY FEATURES
  • Laser 3-chip DLP, 12000 lumens, WUXGA
  • 120Hz high frame rate for superb and sharp motion pictures
  • Lamp-free laser projection and dust resistant liquid cooling system with 20000 hours of free maintenance
  • 20,000:1 contrast ratio
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
Brightness12,000 lumens
Resolution1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
Lamp3-Chip DLP Laser
Power supplyAC 100-240 V 50/60 Hz
Power consumption1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.),
Average power consumption
NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W
LONG LIFE 3: 550W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in),
ICE627087: 2008 Broadcast contents,
Picture mode: Dynamic, Dynamic Contrast3
BTU valueMax 4,096 BTU
DLP™ chip | Panel size24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ chip | Display methodDLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip | Pixels2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
LENSOptional powered zoom/focus lenses
Light sourceLaser Diode (Laser class: Class 1)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³
43,800 hours at constant luminance (Longlife1)
61,320 hours at constant luminance (Longlife2)
87,600 hours at constant luminance (Longlife3)
Screen size1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120-600 inches) with the ET-D75LE90 (16:10 aspect ratio)
Center-to-corner uniformity90%
Contrast20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Scanning frequency | SDISD-SDI signal (YCBCR 4:2:2 10-bit):
SMPTE ST 259 compliant: 525i(480i), 625i(576i)
Single-link HD-SDI signal (YPBPR 4:2:2 10-bit):
SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1035)/60i,
1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p,
1125(1080)/24sF, 1125(1080)/30p
Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 372 compliant: 1125(1080)/60i, 1125(1080)/50i,
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p
2048 x 1080/24p, 2048 x 1080/24sF,
Dual-link HD-SDI signal (X Y Z 4:4:4 12-bit):
SMPTE ST 372 compliant: 2048 x 1080/24p, 2048 x 1080/24sF,
3G-SDI signal (YPBPR 4:2:2 10-bit):
SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p
3G-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i,
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p
Dual-link 3G-SDI signal (YPBPR 4:4:4 12-bit/10-bit):
SMPTE ST 425 compliant: 1125(1080)/60i, 1125(1080)/50i,
2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p
Dual-link 3G-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 425 compliant: 1125(1080)/60i, 1125(1080)/50i,
2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p
Scanning frequency | HDMI/DVI-DHorizontal: 15 kHz-100 kHz, vertical: 24 Hz – 120 Hz,
dot clock: 25 MHz – 162 MHz
Scanning frequency | RGBHorizontal: 15 kHz-100 kHz, vertical: 24 Hz – 120 Hz,
dot clock: 162 MHz or less
Scanning frequency | YPBPR (YCBCR)525i (480i): fH 15.73 kHz; fV 59.94 Hz,
625i (576i): fH 15.63 kHz; fV 50 Hz,
525p (480p): fH 31.47 kHz; fV 59.94 Hz,
625p (576p): fH 31.25 kHz; fV 50 Hz,
750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz,
1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz,
1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz,
1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz,
1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz,
1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning frequency | Video/Y/CfH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift | Vertical±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90),
from center of screen, powered
Optical axis shift | Horizontal±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Keystone correction rangeVertical : ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90),
horizontal: ±15° (0° with the ET-D75LE90)
InstallationCeiling/floor, front/rear
Terminals | SDI IN 1BNC x 2,
Dual-link 3G-SDI signal: SMPTE ST 425 compliant
3G-SDI
(3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI)
signal: SMPTE ST 424 compliant
Dual-link HD-SDI signal: SMPTE ST 372 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant
Terminals | HDMI INHDMI 19-pin x 1, Deep Color, compatible with HDCP,
NOTE: Compatible with non-interlaced signals only.
Terminals | DVI-D INDVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals | RGB 1 INBNC x 5
Terminals | RGB 1 IN | R, G, BR: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR)Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 IN | Video inBNC x 1, 1.0 Vp-p 75 ohms
Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals | RGB 2 IND-sub HD 15-pin (female) x 1
Terminals | RGB 2 IN | R, G, BR: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR)Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | 3D SYNC 1 IN/OUTBNC x 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals | 3D SYNC 2 OUTBNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals | SERIAL IND-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | SERIAL OUTD-sub 9-pin (male) x 1 for link control
Terminals | Remoter 1 InM3 jack x 1 for wired remote control
Terminals | Remoter 1 OutM3 jack x 1 for link control
Terminals | Remoter 2 InD-sub 9-pin x 1 for external control (parallel)
Terminals | DIGITAL LINK/LANRJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
Power cord length3.0 m (9 ft 10 in)
Cabinet materialsMolded plastic
Dimensions (W x H x D)578 x 323.5 x 740 mm
(22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)
Weight44 kg (97.0 lbs) (without lens)
Operating noise43 dB
Operating temperatureNormal
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.)
Eco/Long life 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.)
When the projector is used with a Smoke Cut Filter
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.)
* The brightness of the light source may drop depending on the operating
temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.
Applicable software10%-80% (no condensation)
Technology3-chip DLP Laser
Reviews 0

Reviews

There are no reviews yet.

Be the first to review “Panasonic PT-RZ12K”

Your email address will not be published.

nine − 8 =

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Login

Lost your password?